Home / Insights / Drone Gimbal Bracket: How to Machine Vibration-Isolated Mounts
INSIGHTS

Drone Gimbal Bracket: How to Machine Vibration-Isolated Mounts

Hold the bore and mount face to a common datum and let shock mounts sit in repeatable pockets, not on flat faces.

Bore alignment is the camera’s life or death

A gimbal that is even 0.1 mm off its datum shows up as micro-jitter in the footage. We hold the bore and the mount face to a common datum so the camera stays on axis through the full range of motion.

Isolation design that survives prop-wash

We machine the bracket so the camera’s shock mounts sit in repeatable pockets, not on flat faces — the damping pad keeps the same compression every flight.

Related parts

Gimbal Bracket & Camera Mount
Drone Parts

Gimbal Bracket & Camera Mount

Vibration-isolated bracket with tight bore alignment for camera payloads.

Tolerance ±0.02 mm MOQ 5 pcs Lead time 12–18 days
View

Have a part to machine?

Send your drawing and receive a manufacturability review plus firm pricing within 24 hours.

Upload drawing for quote WhatsApp