Telescope Tube & Optical Housing
Thin-wall tubes, binocular bodies, baffle cones and eyepiece holders — machined to one datum.
View
MACHININGDongguan Hairuixing Technology Co., Ltd.
Thin-wall tubes live or die on concentricity. How we hold the bore concentric with the outside to 0.02 mm.
If the bore is off by 0.05 mm from the outside, the objective and the eyepiece do not share an axis and the image is soft. We machine bore and outside to a common datum and hold 0.02 mm concentricity.
For a 60 mm tube we machine a 1.2 mm wall to ±0.05 mm. Below 1.0 mm we recommend tube-bending, not solid machining, for cost.
Thin-wall tubes, binocular bodies, baffle cones and eyepiece holders — machined to one datum.
ViewMedical OEMs move endoscope components from casting to CNC machining to avoid intergranular corrosion and get ±0.01 mm with full traceability.
ViewHow to machine surgical and orthopaedic components from ISO 10993-compliant 316L, 17-4PH and Ti-6Al-4V ELI with the right surface finish.
ViewRun a 10-piece prototype and a 10,000-piece series on the same programme and fixture. No minimum order quantity.
ViewSend your drawing and receive a manufacturability review plus firm pricing within 24 hours.