Non-standard Automation Parts
Fixtures, connector blocks and mechanism parts built to your machine layout.
View
MACHININGDongguan Hairuixing Technology Co., Ltd.
The jaw interface has to locate the workpiece in one motion. How we machine the pad, the bore and the thread as a set.
The pad, the bore and the thread have to be one system. We machine them in one setup so the jaw locates the part in a single motion, not in a trial-and-error.
Where the pad rubs against the part, we use stainless or add a hardened face so a 6,000-cycle day does not wear the jaw out in a quarter.
Fixtures, connector blocks and mechanism parts built to your machine layout.
ViewMedical OEMs move endoscope components from casting to CNC machining to avoid intergranular corrosion and get ±0.01 mm with full traceability.
ViewHow to machine surgical and orthopaedic components from ISO 10993-compliant 316L, 17-4PH and Ti-6Al-4V ELI with the right surface finish.
ViewRun a 10-piece prototype and a 10,000-piece series on the same programme and fixture. No minimum order quantity.
ViewSend your drawing and receive a manufacturability review plus firm pricing within 24 hours.