Home / Insights / Non-Standard Automation Parts: Design That Survives Real Machines
INSIGHTS

Non-Standard Automation Parts: Design That Survives Real Machines

A part fails because it was not designed around the real cycle. How to spec a bracket, a gripper jaw or a connector block.

Design around the cycle, not the part

A connector block that fails is not because the part is weak — it is because the design did not account for the 6,000 cycles a year. Spec the fatigue load, not the static force.

Material pick

6061-T6 is the default for general parts; 7075-T6 where weight matters; stainless where corrosion or high torque counts. We machine all three on the same centre.

Related parts

Non-standard Automation Parts
Non-standard Automation

Non-standard Automation Parts

Fixtures, connector blocks and mechanism parts built to your machine layout.

Tolerance ±0.02 mm MOQ 1 pc Lead time 10–18 days
View

Have a part to machine?

Send your drawing and receive a manufacturability review plus firm pricing within 24 hours.

Upload drawing for quote WhatsApp