Impellers & Turbine Rotors
5-axis machined impellers, turbine rotors and propellers for aerospace and marine use.
View
MACHININGDongguan Hairuixing Technology Co., Ltd.
Give your machinist three numbers: the balance grade, the runout limit and the test speed. How to read the report.
Balance grade (for example G2.5), runout limit (for example 0.05 mm) and the test speed. Without all three, the report does not prove the rotor is safe.
A dimensional report that only lists the balance weight without the runout is not complete. Ask for the runout on the same face as the balance reference.
5-axis machined impellers, turbine rotors and propellers for aerospace and marine use.
ViewMedical OEMs move endoscope components from casting to CNC machining to avoid intergranular corrosion and get ±0.01 mm with full traceability.
ViewHow to machine surgical and orthopaedic components from ISO 10993-compliant 316L, 17-4PH and Ti-6Al-4V ELI with the right surface finish.
ViewRun a 10-piece prototype and a 10,000-piece series on the same programme and fixture. No minimum order quantity.
ViewSend your drawing and receive a manufacturability review plus firm pricing within 24 hours.