Impellers & Turbine Rotors
5-axis machined impellers, turbine rotors and propellers for aerospace and marine use.
View
MACHININGDongguan Hairuixing Technology Co., Ltd.
A blade set off by 0.05 mm throws the rotor out of balance. How we hold hub, shroud and blades on one datum.
If the blades are machined on two setups, the rotor is out of balance and the machine vibrates. We machine the hub, the shroud and every blade on one datum to ±0.02 mm.
Ti-6Al-4V ELI for marine where weight matters; Inconel 718 for the high-temperature turbine section; 316L for the general case.
5-axis machined impellers, turbine rotors and propellers for aerospace and marine use.
ViewMedical OEMs move endoscope components from casting to CNC machining to avoid intergranular corrosion and get ±0.01 mm with full traceability.
ViewHow to machine surgical and orthopaedic components from ISO 10993-compliant 316L, 17-4PH and Ti-6Al-4V ELI with the right surface finish.
ViewRun a 10-piece prototype and a 10,000-piece series on the same programme and fixture. No minimum order quantity.
ViewSend your drawing and receive a manufacturability review plus firm pricing within 24 hours.