Telescope Tube & Optical Housing
Thin-wall tubes, binocular bodies, baffle cones and eyepiece holders — machined to one datum.
View
MACHININGDongguan Hairuixing Technology Co., Ltd.
The holder has to seat the eyepiece without tilting. We machine the bore and the focuser flat to a common datum.
The bore, the dovetail and the focuser flat are all machined to a common reference. That is the only way the eyepiece seats square in the holder.
The seat to the eyepiece has to be H7 so the eyepiece is not loose but still seats. We hold it at 0.005 mm.
Thin-wall tubes, binocular bodies, baffle cones and eyepiece holders — machined to one datum.
ViewMedical OEMs move endoscope components from casting to CNC machining to avoid intergranular corrosion and get ±0.01 mm with full traceability.
ViewHow to machine surgical and orthopaedic components from ISO 10993-compliant 316L, 17-4PH and Ti-6Al-4V ELI with the right surface finish.
ViewRun a 10-piece prototype and a 10,000-piece series on the same programme and fixture. No minimum order quantity.
ViewSend your drawing and receive a manufacturability review plus firm pricing within 24 hours.