Skived Fin Heatsink
One-piece copper or aluminium fin stack, fins integral with the base.
View
MACHININGDongguan Hairuixing Technology Co., Ltd.
Skived-fin heatsinks cut thermal resistance by up to 40% because the fins are integral with the base. How we machine them in one pass.
A skived fin is cut, not brazed. The fin and the base are one piece of copper or aluminium, so there is no thermal interface at the joint. That alone cuts thermal resistance up to 40% compared to dedicated, brazed fins.
If your heat load or mounting footprint is off-the-shelf, buy. If you need a fin density or base thickness that no vendor stock keeps, we machine it on 5-axis centres to a thermal spec you define.
One-piece copper or aluminium fin stack, fins integral with the base.
ViewMedical OEMs move endoscope components from casting to CNC machining to avoid intergranular corrosion and get ±0.01 mm with full traceability.
ViewHow to machine surgical and orthopaedic components from ISO 10993-compliant 316L, 17-4PH and Ti-6Al-4V ELI with the right surface finish.
ViewRun a 10-piece prototype and a 10,000-piece series on the same programme and fixture. No minimum order quantity.
ViewSend your drawing and receive a manufacturability review plus firm pricing within 24 hours.