Skived Fin Heatsink
One-piece copper or aluminium fin stack, fins integral with the base.
View
MACHININGDongguan Hairuixing Technology Co., Ltd.
Copper moves 2× the heat; aluminium is half the weight and cost. A decision by application.
Copper at 400 W/mK beats aluminium at 205. If your heat load is over 300 W and the footprint is small, copper is the answer.
Aluminium is roughly 40% lighter and 50% cheaper. For a large, low-flux heatsink it is the better choice; for a small, high-flux part, copper wins.
One-piece copper or aluminium fin stack, fins integral with the base.
ViewMedical OEMs move endoscope components from casting to CNC machining to avoid intergranular corrosion and get ±0.01 mm with full traceability.
ViewHow to machine surgical and orthopaedic components from ISO 10993-compliant 316L, 17-4PH and Ti-6Al-4V ELI with the right surface finish.
ViewRun a 10-piece prototype and a 10,000-piece series on the same programme and fixture. No minimum order quantity.
ViewSend your drawing and receive a manufacturability review plus firm pricing within 24 hours.