Non-standard Automation Parts
Fixtures, connector blocks and mechanism parts built to your machine layout.
View
MACHININGDongguan Hairuixing Technology Co., Ltd.
A worn pulley or guide can often be machined back to spec instead of bought new. When to remachine, when to replace.
A 0.2 mm oversize bore is a ream job, not a new pulley. We machine a sleeve to fit and hold the bore concentric with the shaft. A new pulley costs five times that.
If the part has a fatigue crack or has seen more than 10,000 cycles past spec, buy new. Remachining is only safe when the geometry is recoverable and the material is sound.
Fixtures, connector blocks and mechanism parts built to your machine layout.
ViewMedical OEMs move endoscope components from casting to CNC machining to avoid intergranular corrosion and get ±0.01 mm with full traceability.
ViewHow to machine surgical and orthopaedic components from ISO 10993-compliant 316L, 17-4PH and Ti-6Al-4V ELI with the right surface finish.
ViewRun a 10-piece prototype and a 10,000-piece series on the same programme and fixture. No minimum order quantity.
ViewSend your drawing and receive a manufacturability review plus firm pricing within 24 hours.