Custom CNC Machining Service
Send a drawing or a sample — get a manufacturability review and a firm quote.
View
MACHININGDongguan Hairuixing Technology Co., Ltd.
Stainless resists corrosion but is harder to machine than aluminium; titanium is the opposite. A material table.
Stainless is 3× more expensive to machine than aluminium. Where corrosion counts, that is fine; where it does not, 6061 is the default.
Titanium and Inconel hold ±0.005 mm with a 5-axis centre; aluminium holds ±0.01 mm at a fraction of the cost. Match the material to the tolerance you actually need.
Send a drawing or a sample — get a manufacturability review and a firm quote.
ViewMedical OEMs move endoscope components from casting to CNC machining to avoid intergranular corrosion and get ±0.01 mm with full traceability.
ViewHow to machine surgical and orthopaedic components from ISO 10993-compliant 316L, 17-4PH and Ti-6Al-4V ELI with the right surface finish.
ViewRun a 10-piece prototype and a 10,000-piece series on the same programme and fixture. No minimum order quantity.
ViewSend your drawing and receive a manufacturability review plus firm pricing within 24 hours.