Telescope Tube & Optical Housing
Thin-wall tubes, binocular bodies, baffle cones and eyepiece holders — machined to one datum.
View
MACHININGDongguan Hairuixing Technology Co., Ltd.
The binocular body has to hold both objective and ocular bores concentric. How we machine it in one setup.
Both objective bores have to be concentric to the focuser axis. We machine them in one setup so the axis error across the 100 mm bridge is under 0.03 mm.
We machine a 1 mm seal groove on the bridge so a gasket can sit without being crushed. A light leak between the two tubes is the most common complaint on binoculars.
Thin-wall tubes, binocular bodies, baffle cones and eyepiece holders — machined to one datum.
ViewMedical OEMs move endoscope components from casting to CNC machining to avoid intergranular corrosion and get ±0.01 mm with full traceability.
ViewHow to machine surgical and orthopaedic components from ISO 10993-compliant 316L, 17-4PH and Ti-6Al-4V ELI with the right surface finish.
ViewRun a 10-piece prototype and a 10,000-piece series on the same programme and fixture. No minimum order quantity.
ViewSend your drawing and receive a manufacturability review plus firm pricing within 24 hours.