Telescope Tube & Optical Housing
Thin-wall tubes, binocular bodies, baffle cones and eyepiece holders — machined to one datum.
View
MACHININGDongguan Hairuixing Technology Co., Ltd.
A baffle cone has to block light without touching the aperture. How we machine the inner cone and the reference.
The inner cone angle has to match the field of view exactly, or it clips the image. We machine the cone on the same datum as the focuser so the baffle does not move relative to the axis.
A matte, low-reflectance inside is what stops stray light. We finish the inside to Ra 1.6 and specify a non-reflective coating where needed.
Thin-wall tubes, binocular bodies, baffle cones and eyepiece holders — machined to one datum.
ViewMedical OEMs move endoscope components from casting to CNC machining to avoid intergranular corrosion and get ±0.01 mm with full traceability.
ViewHow to machine surgical and orthopaedic components from ISO 10993-compliant 316L, 17-4PH and Ti-6Al-4V ELI with the right surface finish.
ViewRun a 10-piece prototype and a 10,000-piece series on the same programme and fixture. No minimum order quantity.
ViewSend your drawing and receive a manufacturability review plus firm pricing within 24 hours.