5-Axis vs. 3-Axis CNC: When the Extra Two Axes Are Worth It
5-axis cuts in one setup what 3-axis does in three. How to know when you need it.
One setup, less error
A part that has to be flipped on a 3-axis centre is measured, re-clamped and re-zeroed. Each flip adds a few microns. 5-axis keeps everything on one datum, one clamp.
Overhang and undercuts
If your part has an overhang or an undercut that a 3-axis tool cannot reach, 5-axis is the only option. We machine it in one pass on a 5-axis centre.
Related topics
Swiss-Type Turning for Small Parts: Why It Beats Standard Lathes
For a part under 10 mm long, a Swiss-type lathe holds ±0.01 mm where a standard lathe holds ±0.05 mm.
ViewRapid CNC Prototyping in 5 Days: How We Run It
A 10-piece prototype on the same programme as the series, delivered in 5 working days. How the timeline works.
ViewRapid Prototyping Materials: How to Pick the Right One
Aluminium, stainless or titanium for the prototype? How to pick by the stage you are in.
View